Chapter 3 235
Mode
Distance To Fault
Mode
Clear Calibration
Clear Calibration deletes the current calibration data, enabling you to re-calibrate the
instrument for the same frequency range.
Limit Masks
Sets the Limit Masks submenu keys, it is then possible to select to configure either Limit
Mask 1 (Upper) or Limit Mask 2 (Lower).
Limit Mask 1 (upper) or Limit Mask 2 (Lower)
Limit Mask 1 (upper) access the upper limit mask keys.
Limit Mask 2 (Lower) access the lower limit mask keys.
You can define a limit mask that matches your maximum or minimum measurement
Preset 4
Min 1
Max 100
Key Path
Meas Setup, Avg Number
Mode Stimulus / Response
Key Path
Meas Setup, Clear Calibration
Mode Stimulus / Response
Dependencies /
Couplings
The
Limit Mask 1 (Upper) menu link key accesses the keys to
configure the upper limit mask for the Center, 1
st
, or 2
nd
segments (dependent on selected segment).
The
Limit Mask 2 (Lower) menu link key accesses the keys to
configure the lower limit mask for the Center, 1
st
, or 2
nd
segments (dependent on selected segment).
State Saved Saved in instrument state.
Key Path
Meas Setup, Limit Masks, Limit Mask 1 or Limit Mask 2
To Next Page
Loading...
