Chapter 3 243
Mode
Distance To Fault
Mode
Level: 2nd Segment Right
Sets the power level, for the 2
nd
segment to the Right of the Center segment. This key is only
available when
2
nd
has been selected with the Segments key.
FFT Size
This sets the FFT size by specifying the number of FFT points.
NOTE You can set the number of points to 256, 512, or 1024, but you will only
be able to save 256 data points when you save trace data. This is
because only 256 points are ever used to display the trace, regardless of
how many points you have used to actually make the measurement.
You will not, however, be losing any resolution, or reducing the quality
Mode Stimulus / Response
Notes
Key is only displayed when the selected segment is 2
nd
, and the
selected segment side is Left.
Preset Not affected by a preset
State Saved Saved in instrument state.
Min –10 dB
Max 150 dB
Key Path
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment: Left Level
Default Unit dB
Mode Stimulus / Response
Notes
Key is only displayed when the selected segment is 2
nd
, and the
selected segment side is Right.
Preset Not affected by a preset
State Saved Saved in instrument state.
Min –10 dB
Max 150 dB
Key Path
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment: Right Level
Default Unit dB
To Next Page
Loading...
