242 Chapter 3
Mode
Distance To Fault
Mode
2nd Segment (Left or Right Limits)
Sets to allow definition of the limits Left or Right of the center segment for the 2
nd
Segment. The
Left or Right amplitude limits can be changed with the
Level key. This key is only available when
2
nd
has been selected with the Segments key.
Level: 2nd Segment Left
Sets the power level, for the 2
nd
segment to the Left of the Center segment. This key is only
available when
2
nd
has been selected with the Segments key.
Key Path
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment
Mode Stimulus / Response
Notes
Key is only displayed when the selected segment is 2
nd
.
Dependencies /
Couplings
The span for each of the left
The Left span is calculated as follows:
(<maximum span>/2) – (<center segment span>/2) - <first
segment left span>
The Right span is calculated as follows:
(<maximum span>/2) – (<center segment span>/2) - <first
segment right span>
Where:
<maximum span> is the maximum distance
<center segment span>
<first segment left span>
<first segment right span>
Preset Not affected by a preset but set per default to Left with a value
of 20 m (meters) after a power cycling
State Saved Saved in instrument state.
Range Left | Right
Key Path
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment (Left or Right
Limits)
To Next Page
Loading...
