Chapter 4 261
Utility and Control/Sweep Functions
Utility Functions
Utility and Control/Sweep Functions
Trace 1 Selects trace 1 into which trace data is recalled.
Trace 2 Selects trace 2 into which trace data is recalled.
Trace 3 Selects trace 3 into which trace data is recalled.
Trace 4 Selects trace 4 into which trace data is recalled.
Device
When you have selected a recall type of State or Trace, a menu is displayed that enables
you to recall a file normally from the internal drive or import the one from a USB device.
State Saved Destination is not saved in the instrument state
Key Path
Recall, Destination
Mode All
Key Path
Recall, Destination, Trace 1
Mode All
Key Path
Recall, Destination, Trace 2
Mode All
Key Path
Recall, Destination, Trace 3
Mode All
Key Path
Recall, Destination, Trace 4
Mode All
Preset Location survives Factory Preset, *RST, and power on.
To Next Page
Loading...
