Network QoS Policies
Quality of Service Guide 117
fc fc-name — Enter this required parameter to specify the fc-name with which the code point will
be associated.
Default none, for every DSCP value defined, the forwarding class must be
indicated.
Values be, l2, af, l1, h2, ef, h1, nc
profile {in | out} — Enter this required parameter to indicate whether the DiffServ code point
value is the in-profile or out-of-profile value.
DSCP values mapping to forwarding classes Expedited (ef), High-1 (h1) and Network-
Control (nc) can only be set to in-profile.
af22 20 0x14 0b010100
af23 22 0x16 0b010110
af11 10 0x0a 0b001010
af12 12 0x0c 0b001100
af13 14 0x0e 0b001110
default 0 0x00 0b000000
Table 22: Default Class Selector Code Points to DSCP Value Mapping Table
DSCP Name DSCP Value
Decimal
DSCP Value
Hexadecimal
DSCP Value
Binary
cs7 56 0x38 0b111000
cs6 48 0X30 0b110000
cs5 40 0x28 0b101000
cs4 32 0x20 0b100000
cs3 24 0x18 0b011000
cs2 16 0x10 0b010000
cs1 08 0x8 0b001000
Table 21: Default DSCP Names to DSCP Value Mapping Table (Continued)
DSCP Name DSCP Value
Decimal
DSCP Value
Hexadecimal
DSCP Value
Binary
To Next Page
Loading...
