Network QoS Policy Command Reference
118 Quality of Service Guide
DSCP values mapping to forwarding class ‘be’ can only be set to out-of-profile.
Default None, for every DSCP value defined, the profile must be
indicated. If a DSCP value is not mapped, the default-action
forwarding class and profile state will be used for that value.
Values in, out
fp-redirect-group
Syntax fp-redirect-group broadcast-policer policer-id
no fp-redirect-group broadcast-policer
Context config>qos>network>ingress>fc
Description This command is used to redirect the FC of a broadcast packet received in a VPLS service over a PW
or network IP interface to an ingress forwarding plane queue-group.
It defines the mapping of a FC to a policer-id and redirects the lookup of the policer of the same ID in
some ingress forwarding plane queue-group instance. However, the queue-group name and instance
are explicitly provided only at the time the network QoS policy is applied to the ingress context of a
spoke or mesh SDP or a network IP interface.
The broadcast-policer statement is ignored when the network QoS policy is applied to any object other
than a VPLS spoke or mesh SDP or a network IP interface.
The no version of this command removes the redirection of the FC.
Parameters policer policer-id — The specified policer-id must exist within the queue-group template applied
to the ingress context of the forwarding plane.
Values 1 to 32
fp-redirect-group
Syntax fp-redirect-group unknown-policer policer-id
no fp-redirect-group unknown-policer
Context config>qos>network>ingress>fc
Description This command is used to redirect the FC of an unknown packet received in a VPLS service on a PW
or network IP interface to an ingress forwarding plane queue-group.
It defines the mapping of a FC to a policer-id and redirects the lookup of the policer of the same ID in
some ingress forwarding plane queue-group instance. However, the queue-group name and instance
are explicitly provided only at the time the network QoS policy is applied to the ingress context of a
VPLS spoke or mesh SDP or a network IP interface.
The unknown-policer statement is ignored when the network QoS policy is applied to any object other
than a VPLS spoke or mesh SDP or a network IP interface.
To Next Page
Loading...
