Service SAP QoS Policy Command Reference
226 Quality of Service Guide
— description description-string
—no description
— cbs {size [bytes | kilobytes] | default}
—no cbs
— high-prio-only percent-of-mbs
—no high-prio-only
— mbs {size [bytes | kilobytes] | default}
—no mbs
— packet-byte-offset {add bytes | subtract bytes}
—no packet-byte-offset
— parent {root | arbiter-name} [level level] [weight weight-within-level]
—no parent
— percent-rate pir-percent [cir cir-percent]
—no percent-rate
—no profile-capped
— rate {max | kilobits-per-second}
[cir {max | kilobits-per-second}]
—no rate
— stat-mode {no-stats | minimal | offered-profile-no-cir | offered-priority-no-
cir | offered-limited-profile-cir | offered-profile-cir | offered-priority-
cir | offered-total-cir | offered-profile-capped-cir | offered-limited-
capped-cir}
—no stat-mode
— prec ip-prec-value [fc fc-name] [priority {low | high}]
—no prec ip-prec-value
— queue queue-id [multipoint] [queue-type] [queue-mode] pool pool-name
—no queue queue-id
— adaptation-rule [pir adaptation-rule] [cir adaptation-rule]
—no adaptation-rule
— adv-config-policy policy-name
—no adv-config-policy
— burst-limit
—no burst-limit
— cbs size-in-kbytes
—no cbs
— hi-low-prio-only percent
—no hi-low-prio-only
— high-prio-only percent
—no high-prio-only
— mbs size [bytes | kilobytes]
—no mbs
— packet-byte-offset {add bytes | subtract bytes}
—no packet-byte-offset
— parent scheduler-name [weight weight] [level level] [cir-weight cir-weight]
[cir-level cir-level]
—no parent
— percent-rate pir-percent [cir cir-percent] [port-limit | local-limit]
— percent-rate pir-percent police [port-limit
| local-limit]
—no percent-rate
— [no] pool pool-name
— rate pir-rate [cir cir-rate | police]
—no rate
— scope {exclusive | template}
—no scope
— sub-insert-shared-pccrule start-entry entry-id count count
To Next Page