Service SAP QoS Policy Command Reference
250 Quality of Service Guide
fc fc-name: — The fc reclassification action is optional. When specified, packets matching the IP
DSCP value corresponding to a specified dscp-name will be explicitly reclassified to the
forwarding class specified as fc-name regardless of the ingress classification decision. The
explicit forwarding class reclassification may be overwritten by an ip-criteria reclassification
match. The fc name defined must be one of the eight forwarding classes supported by the
system. To remove the forwarding class reclassification action for the specified DSCP value,
the dscp command must be re-executed without the fc reclassification action defined.
Values be, l1, af, l2, h1, ef, h2 or nc
profile {in | out} — The profile reclassification action is optional. When specified, packets
matching the IP DSCP value corresponding to a specified dscp-name will be explicitly
reclassified to either in-profile or out-of-profile regardless of the ingress profiling decision.
The explicit profile reclassification may be overwritten by an ip-criteria reclassification
match. To remove the profile reclassification action for the specified dscp-name, the dscp
command must be re-executed without the profile reclassification action defined.
in — The in parameter is mutually exclusive to the out parameter following the profile
reclassification action keyword. Either in or out must be specified when the profile keyword
is present. When in is specified, any packets matching the reclassification rule will be treated
as in-profile by the egress forwarding plane. This value may be overwritten by an explicit
profile action in an ip-criteria reclassification match.
out — The out parameter is mutually exclusive to the in parameter following the profile
reclassification action keyword. Either in or out must be specified when the profile keyword
is present. When out is specified, any packets matching the reclassification rule will be treated
as out-of-profile by the egress forwarding plane. This value may be overwritten by an explicit
profile action in an ip-criteria reclassification match.
hsmda-counter-override counter-id — The hsmda-counter-override reclassification action is
optional and only has significance on SAPs which are created on an HSMDA. When
specified, packets matching the IP precedence value will be mapped to the defined HSMDA
exception counter-id for the packets queue group. The default behavior is to use the default
counter on the queue group for the queue to which the packet is mapped. The hsmda-counter-
override action may be overwritten by an ip-criteria reclassification rule match. The specified
counter-id must be specified as an integer between 1 and 8. To remove the ESMDA exception
counter reclassification action for the specified DSCP value, the dscp command must be re-
executed without the hsmda-counter-override reclassification action defined. This parameter
applies only to the 7740 ESS and 7750 SR.
Values 1 to 8
dynamic-policer
Syntax dynamic-policer
Context config>qos>sap-egress
config>qos>sap-ingress
To Next Page
Loading...
