Service SAP QoS Policy Command Reference
320 Quality of Service Guide
To configure all packets with a source MAC OUI value of 00-03-FA are subject to a match
condition, then the entry should be specified as: 003FA000000 0xFFFFFF000000
Default 0xFFFFFFFFFFFF (hex) (exact match)
Values 0x00000000000000 to 0xFFFFFFFFFFFF (hex)
ssap
Syntax ssap ssap-value [ssap-mask]
no ssap
Context config>qos>sap-ingress>mac-criteria>entry
Description This command configures an Ethernet 802.2 LLC SSAP value or range for an ingress SAP QoS policy
match criterion.
This is a one-byte field that is part of the 802.2 LLC header of the IEEE 802.3 Ethernet Frame.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and cannot be part of the
same match criteria.
The no form of this command removes the ssap match criterion.
Default none
Parameters ssap-value — The 8-bit ssap match criteria value in hex.
Values 0x00 to 0xFF (hex)
ssap-mask — This is optional and can be used when specifying a range of ssap values to use as the
match criteria.
This 8 bit mask can be configured using the following formats:
Default none
Values 0x00 to 0xFF
Format Style Format Syntax Example
Decimal DDD 240
Hexadecimal 0xHH 0xF0
Binary 0bBBBBBBBB 0b11110000
To Next Page
Loading...
