QoS Scheduler Policy Command Reference
586 Quality of Service Guide
scheduler-hierarchy customer
Syntax scheduler-hierarchy customer customer-id site customer-site-name [scheduler
scheduler-name] [ingress | egress] [detail]
Context show>qos
Description This command displays the scheduler hierarchy per customer multi-service-site.
Parameters customer customer-id — Specifies the ID number associated with a particular customer.
Values 1 to 2147483647
site customer-site-name — The unique name customer site name.
scheduler scheduler-name — The unique scheduler name created in the context of the scheduler
policy.
ingress — Displays ingress SAP customer scheduler stats.
egress — Displays egress SAP customer scheduler stats.
detail — Displays detailed information.
Output Show QoS Scheduler-Hierarchy Customer Output
The following table describes the customer scheduler hierarchy fields.
Table 33: Show QoS Scheduler-Hierarchy Customer Output Fields
Label Description
Legend Admin CIR/PIR: Specifies the configured value of CIR/PIR.
Assigned CIR/PIR: Specifies the PIR/CIR rate given to a member by
that parent level.
Offered CIR/PIR: Specifies the offered load on that member.
Consumed CIR/PIR: Specifies the amount of scheduler bandwidth used
by this member.
Lvl/Wt Specifies the priority level of the scheduler when compared to other
child schedulers and queues vying for bandwidth on the parent
schedulers during the ‘above CIR’ distribution phase of bandwidth
allocation.
Weight defines the relative weight of this scheduler in comparison to
other child schedulers and queues at the same level.
Cir Lvl/Wt Specifies the level of hierarchy when compared to other schedulers and
queues when vying for bandwidth on the parent scheduler.
Weight defines the relative weight of this queue as compared to other
child schedulers and queues while vying for bandwidth on the parent
scheduler.
PIR Specifies the PIR rate.
To Next Page
Loading...
