Alcatel-Lucent 7450 - Page 587

QoS Scheduler Policies
Quality of Service Guide 587
Sample Output
A:D# show qos scheduler-hierarchy customer 1 site bc
===============================================================================
Scheduler Hierarchy - Customer 1 MSS bc
===============================================================================
Root (Ing)
| slot(1)
|--(S) : gp
Root (Egr)
| slot(1)
|--(S) : gp
| |
| |--(S) : pb
| | |
| | |--(S) : pbs
| |
| |--(S) : mb
| | |
| | |--(S) : mbs
|
|--(S) : rb
| |
| |--(S) : rbs
===============================================================================
A:D#
scheduler-hierarchy port
Syntax scheduler-hierarchy port port-id [detail] queue-group queue-group-name [scheduler
scheduler-name] [ingress | egress]
scheduler-hierarchy port port-id [detail]
CIR Specifies the CIR rate.
Parent Specifies the parent scheduler that governs the available bandwidth
given the queue aside from the queue’s PIR setting.
Service-Id The ID that uniquely identifies the policy.
Customer-Id The ID that uniquely identifies the customer.
SAP Specifies the Service Access Point (SAP) within the service where the
policy is applied.
Multi Service Site Specifies the multi-service site name.
Orphan Queues Specifies the number of queues in an orphaned state.
Hierarchy Displays the scheduler policy tree structure.
Table 33: Show QoS Scheduler-Hierarchy Customer Output Fields (Continued)
Label Description (Continued)