QoS Scheduler Policy Command Reference
588 Quality of Service Guide
Context show>qos
Description This command displays scheduler hierarchy information per port.
Parameters port-id — Specifies the port ID.
detail — Displays detailed information.
queue-group queue-group-name — Displays information about the specified queue group on the
port.
scheduler scheduler-name — Displays information about the specified scheduler policy on the
port.
ingress — Specifies to display ingress queue group information.
egress — Specifies to display egress queue group information.
Output Show QoS Scheduler-Hierarchy Port Output
The following table describes port scheduler hierarchy fields.
Sample Output
*A:Dut-R# show qos scheduler-hierarchy port 1/2/1 detail
port-id slot/mda/port [.channel]
eth-sat-id esat-id/slot/port
esat keyword
id 1 to 20
pxc-id pxc-id.sub-port
pxc keyword
id 1 to 64
sub-port a, b
Table 34: Show QoS Schedule-Hierarchy Port Output Fields
Label Description
S Displays the scheduler name.
Q Displays the queue ID and information.
Admin CIR/PIR: Specifies the configured value of CIR/PIR.
Assigned CIR/
PIR:
Specifies the on-the-wire PIR/CIR rate given to a member by that parent
level.
Offered CIR/PIR: Specifies the on-the-wire offered load on that member.
Consumed CIR/PIR: Specifies the amount of scheduler bandwidth used by this member.
To Next Page
Loading...
