Alcatel-Lucent 7450 - Page 613

QoS Scheduler Policies
Quality of Service Guide 613
agg-rate subscriber
Syntax subscriber sub-indent-string [egress] [detail]
Context show>qos
Description This command displays the HQoS aggregate rate limit per subscriber.
Parameters sub-indent-string — Specifies the subscriber identification string of the subscriber.
egress — Displays egress SAP customer scheduler stats.
detail — Displays detailed information.
port-scheduler-policy
Syntax port-scheduler-policy [port-scheduler-policy-name] [association]
port-scheduler-policy port-scheduler-policy-name network-policy network-queue-policy-
name
port-scheduler-policy port-scheduler-policy-name sap-egress policy-id
port-scheduler-policy port-scheduler-policy-name scheduler-policy scheduler-policy-
name
port-scheduler-policy port-scheduler-policy-name scheduler-policy scheduler-policy-
name sap-egress policy-id
Context show>qos
Description This command displays port-scheduler policy information
Parameters port-scheduler-policy-name — Displays information for the specified existing port scheduler
policy.
association — Displays associations related to the specified port scheduler policy.
network-policy network-queue-policy-name — Displays information for the specified existing
network queue policy.
sap-egress policy-id — Displays information for the specified existing SAP egress policy.
scheduler-policy scheduler-policy-name — Displays information for the specified existing
scheduler policy.
Output Show QoS Port Scheduler Output
The following table describes the QoS port scheduler policy fields.
Table 40: Show QoS Port Scheduler Output Fields
Label Description
Policy Name Displays the port scheduler policy name.