Alcatel-Lucent 7450 - Page 614

QoS Scheduler Policy Command Reference
614 Quality of Service Guide
Sample Output
*A:Dut-R# show qos port-scheduler-policy p1
===============================================================================
QoS Port Scheduler Policy
===============================================================================
Policy-Name : p1
Max Rate : max Last changed : 05/21/2007 10:39:15
Lvl1 PIR : max Lvl1 CIR : max
Lvl2 PIR : max Lvl2 CIR : max
Lvl3 PIR : max Lvl3 CIR : max
Lvl4 PIR : max Lvl4 CIR : max
Lvl5 PIR : max Lvl5 CIR : max
Lvl6 PIR : max Lvl6 CIR : max
Lvl7 PIR : max Lvl7 CIR : max
Lvl8 PIR : max Lvl8 CIR : max
Orphan Lvl : default Orphan Weight : default
Orphan CIR-Lvl : default Orphan CIR-Weight : default
===============================================================================
QoS Port Scheduler Policy
===============================================================================
Policy-Name : p1
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
Max Rate Displays the explicit maximum frame-based bandwidth limit of this
port scheduler.
Lvlx PIR Displays the total bandwidth limit, PIR, for the specified priority level.
Lvlx CIR Displays the within-cir bandwidth limit for the specified priority level.
Orphan Lvl Displays above-cir port priority of orphaned queues and scheduler.
Orphan Weight Displays the weight of orphaned queues and schedulers that are above-
cir.
Orphan CIR-Lvl Displays the port priority of orphaned queues and schedulers that are
within-cir.
Orphan CIR-Weight Displays the weight of orphaned queues and schedulers that are within-
cir.
Associations Displays associations related to the specified port scheduler policy.
Mode Displays the port scheduler policy mode (STRICT, RR, WRR, WDRR).
Accounting Displays whether the accounting mode is frame-based or packet-based
Last Changed Displays the last time the configuration changed.
Queue # Displays the weight of the queue if configured.
Table 40: Show QoS Port Scheduler Output Fields (Continued)
Label Description (Continued)