Advanced QoS Policies
Quality of Service Guide 675
Advanced QoS Policy Command Reference
Command Hierarchies
Configuration Commands
config
—qos
— [no] adv-config-policy policy-name
— description description-string
—no description
— child-control
— offered-measurement
— [no] add {percent percent-of-admin-pir | rate rate-in-kilobits-per-
second} [min-only | active-min-only]
— [no] fast-start
— [no] fast-stop
— [no] granularity {percent percent-of-admin-pir | rate rate-in-kilobits-
per-second}
— [no] high-rate-hold-time seconds [min-only | active-min-only]
— [no] max-decrement {percent percent-of-admin-pir | rate rate-in-
kilobits-per-second}
— [no
] sample-interval sample-period
— [no] time-average-factor taf-value [dec-only]
— bandwidth-distribution
— [no] above-offered-cap {percent percent-of-admin-pir | rate rate-in-
kilobits-per-second}
— [no] enqueue-on-pir-zero
— [no] granularity {percent percent-of-admin-pir | rate rate-in-kilobits-
per-second} [min-only]
— [no] limit-pir-zero-drain
— [no] lub-init-min-pir
— [no] internal-scheduler-weight-mode {default | force-equal |
offered-load | capped-offered-load}
Operational Commands
config
—qos
— copy adv-config-policy src-name dst-name [overwrite]
To Next Page
Loading...
