Alcatel-Lucent 7450 - Page 695

QoS ATM Traffic Descriptor Profiles
Quality of Service Guide 697
Epipe SAPs
Use the following CLI syntax to apply ATM QoS traffic descriptor profile policies to Epipe
SAPs on ingress and egress.
CLI Syntax: config>service>epipe>sap# atm
egress
traffic-desc traffic-desc-profile-id
ingress
traffic-desc traffic-desc-profile-id
IES SAPs
Use the following CLI syntax to apply ATM QoS traffic descriptor profile policies to IES
SAPs on ingress and egress.
CLI Syntax: config>service>ies>if>sap# atm
egress
traffic-desc traffic-desc-profile-id
ingress
traffic-desc traffic-desc-profile-id
Ipipe SAPs
Use the following CLI syntax to apply ATM QoS traffic descriptor profile policies to Ipipe
SAPs on ingress and egress.
CLI Syntax: config>service>ipipe>sap# atm
egress
traffic-desc traffic-desc-profile-id
ingress
traffic-desc traffic-desc-profile-id
VPRN SAPs
Use the following CLI syntax to apply ATM QoS traffic descriptor profile policies to VPRN
SAPs on ingress and egress. This command applies only to the 7750 SR and 7950 XRS.
CLI Syntax: config>service>vprn>if>sap# atm
egress
traffic-desc traffic-desc-profile-id
ingress
traffic-desc traffic-desc-profile-id