Allied Telesis IE340 Series Installation Guide

IE340 Series Installation Guide
24
Features
Here are the basic features of the switches.
Twisted Pair
Ports
Here are the basic features of the twisted pair ports:
 Sixteen ports on the IE340-20GP and IE340L-18GP switches
 Eight ports on the IE340-12GP and IE340-12GT switches
 10/100/1000Mbps supported on all ports
 IEEE 802.3i 10Base-T compliant
 IEEE 802.3u 100Base-TX compliant
 IEEE 802.3ab 1000Base-T compliant
 IEEE 802.3u Auto-Negotiation compliant
 IEEE 802.3x flow control in full-duplex mode
 IEEE 802.3x back pressure compliant
 Jumbo frames up to 9KB
 RJ-45 connectors
Power Over
Ethernet (PoE)
The following IE340 switches are PoE Power Sourcing Equipment (PSE):
 IE340-12GP
 IE340-20GP
 IE340L-18GP
They have these PoE features:
 All twisted pair ports source PoE
 IEEE 802.3af Power over Ethernet (PoE) compliant, maximum of
15.4W per port
 IEEE 802.3at Power over Ethernet (PoE+) compliant, maximum of
30W per port
 Support powered device classes 0 to 4
 Support Alternative A wiring for PoE or PoE+ devices
 Maximum PoE budget of 240 watts with one or two power supplies
 Dynamic PoE power budget allocation, according to powered
device consumptions and/or port prioritization
 Uninterrupted PoE during warm switch restarts
 PoE power shedding on over-temperature, according to port
prioritization.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English