Allied Telesis IE340 Series Installation Guide

Chapter 5: Powering On the Switch
111
Figure 53. Initialization Messages (Continued)
Starting base/crond... [ OK ]
starting base/appmond... [ OK ]
Starting base/clockcheck... [ OK ]
Starting network/execd... [ OK ]
Starting base/inet... [ OK ]
Received event apteryx.done
Starting hardware/early_host_info... [ OK ]
Starting base/alfred... [ OK ]
Starting network/kermond... [ OK ]
Starting network/fips (apteryx.done)... [ OK ]
Starting base/logconf... [ OK ]
Starting hardware/platformd.... [ OK ]
Starting hardware/plugman.... [ OK ]
Starting hardware/timeout.... [ OK ]
Starting hardware/hardware-done.... [ OK ]
Received event board.inserted
Received event hardware.done
Starting network/poefw... [ OK ]
Starting base/external-media... [ OK ]
Received event poefw.done
Starting network/hostcfg... [ OK ]
Received event hostcfg.done
Starting network/cmlplatformd... [ OK ]
Starting base/eventwatch... [ OK ]
Starting network/startup... [ OK ]
Starting hardware/platform_eventd.... [ OK ]
Starting network/licd... [ OK ]
Starting network/tempmond... [ OK ]
Received event network.enabled
Initializing HA processes:
almond, atmf_agentd, execd, hostd, sflowd, vrrpd, mstp
ripngd, rmon, atmfd, espr, hsl, irdpd, lldpd
loopprot, ospf6d, auth, pim6d, ripd, nsm, pdmd
lacp, onm, udldd18:00:59, awplus Platform: SENSOR Board Base - Voltage:
Input 1: Alarm asserted. Reading:0.000 Threshold:46.000 (Volts)
, pimd, bgpd, ospfd18:00:59 awpplus Platfor: SENSOR Board Base - Almmmon:
Relay Output 1: Alarm cleared. Closed.
, imi
Received event network. initialized
Assigning Active Workload to HA processes:
hsl, nsm, sflowd, irdpd, lacpd, loopprotd, ospfd
ripd, ripngd, rmond, vrrpd, bgpd, epsfr, mstpd
onmd, ospf6d, pdmd, pim6d, pimd, authd, lldpd
imi

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English