7. Maintenance
358
CPU Direct Representation Variable
DG_Modulo.tDetailed.*
AT Variable
Exception.
wExceptionCode
Exception code generated by the
RTS. See Table 7-29.
Exception.
byProcessorLoad
Level, in percentage (%), of
charge in the processor.
Table 7-9. Exception Detailed Diagnostics Group Description
Note:
Exception Code: the code of the exception generated by the RTS (Runtime System) can be
consulted below:
There is no exception code.
Watchdog time of the IEC task
expired (Software Watchdog).
Checksum error after the program
download.
Cycle time (execution) exceeded.
Program online updating too long.
External references not resolved.
Project not loaded, as the retentive
variables cannot be reallocated.
Project not loaded and deleted.
Retentive memory is corrupted and
cannot be mapped.
Watchdog in the processor load of all
IEC task detected.
Project can be loaded but causes a
drop later on.
Target of startup application does not
match to the current target.
FPU: Operand is not normal.
Downloaded file Checksum with
error.
Retentive identity is not
correspondent to the current identity
of the boot project program.
IEC task configuration failure.
Application working with wrong
target.
Table 7-10. RTS Exception codes
CPU Direct Representation Variable
DG_Modulo.tDetailed.* AT
Variable
WebVisualization.
byConnectedClients
Clients number connected
to the WebVisualization.
Table 7-11. WebVisualization Detailed Diagnostics Group Description
To Next Page
Loading...
General