Maintenance, repair and care work
Cirrus 3/4/6000 DB2034 08.04
131
after 50 hours of operation
• Check tyre pressure. The tyre pressure is 2,5 bar.
• Check the oil level inside the Vario gearbox (see Fig. 216). Oil change not
necessary.
• Grease all lubrication points according to the lubrication point review (chapter
10.1.1)
Checking oil level in the Vario gearbox
• Park the machine on level ground
• The oil level must be visible in the oil gauge
window (Fig. 216/1) of the Vario gearbox.
When the oil level is not visible in the oil gauge window
of the Vario gearbox, check the Vario gearbox for
leakage.
The leaking Vario gearbox should be repaired in a
professional workshop.
Top up missing oil following table (Fig. 217).
After filling cover the filler neck with the dust cap (Fig.
216/2).
Fig. 216
Filling quantity and hydraulic oil type for the Vario gearbox
Total filling quantity 0,9 litre
Gear oil Wintershall Wintal UG22 WTL-HM
at random:
Gear oil Fuchs Renolin MR5 VG22
Fig. 217
To Next Page
Loading...
Need help?
General
