Introduction User manual
System component Description
Standard configuration is for a track gauge
of 1000mm. For different track gauges,
the appropriate track gauge extension is
necessary.
The illustration shows the track trolley
with the 435mm gauge extension (for the
measurement on a track gauge of 1435mm).
One gauge extension of choice is included
in the system packages, additional gauge
extensions have to be ordered separately.
Insulation between the 2-wheel-part and the
1-wheel-part ensures that no electric shunt
is created between the left and the right rail.
The track trolley GRP TSC is available with
two different wheel configurations:
■
Metallic surface with synthetic core
■
Synthetic material
Please contact Amberg Technologies AG for
support regarding the wheel configuration.
TGS FX
Gauge Extension
Enables the track trolley to be used on
different track gauges. The following track
gauge extensions are available as standard.
■
67mm for gauge 1067mm
■
372mm for gauge 1372mm
■
435mm for gauge 1435mm
■
524mm for gauge 1524mm
■
600mm for gauge 1600mm
■
668mm for gauge 1668/1676mm
Other gauge extensions are available upon
request from Amberg Technologies.
TGS FX
Transport box
For protection during delivery and transport
of the system.
Page 20 of 114 © Amberg Technologies AG, 2023
To Next Page
Loading...