PN 305892901, Rev S
Special Warnings and Information
Equipment Used in Class I, Division 2 Hazardous Locations
This equipment is suitable for Use in Class I, Division 2, Groups ABCD (UL1604/
CSA#213) and general purpose areas only.
Explosion Hazard – Substitution of Components May Impair Suitability for
Class I, Division 2.
AVERTISSEMENT – Risque d’explosion – La substitution de composants peut
rendre ce materiel inacceptable pour les emplacements de Classe I, Division 2.
Refer to the “Safety Critical Components” in the 3050-RM Analyzer Replacement Parts
list in Chapter 4 of this manual.
Explosion Hazard – Do Not Disconnect Equipment Unless Power Has Been
Switched O or the Area is Known to be Non-Hazardous.
AVERTISSEMENT – Risque d’explosion – Avant de déconnecter l’équipement,
coupez le courant où vous assurez que l’emplacement est designé non dan-
gereux.
All input and output wiring must be in accordance with Class I, Division 2 wiring meth-
ods (NEC Sec 501.4(b) or CEC 18-152) (UL1604/CSA#213) and in accordance with the
authority having jurisdiction.
Dryer Warning
When removing and installing dryers, please follow all handling guidelines
provided in the MSDS (located in the back of the manual). When shipping the
analyzer with the dryers installed, consult the MSDS for appropriate shipping
information and instructions.
Contents | xi
To Next Page
Loading...
Need help?
General
