Ametek 3050-RM - Config Key Sub-menus: Display, Communication, Sample Gas

PN 305892901, Rev S
Cong Key
The Cong key is used to dene device and communication settings.
Display
Select the format for the display you want to use.
Contrast
Enter a value from '1' to '9'. The default is '5'.
Back Light
Select On or O. The default is On.
Font
This is a factory-set parameter that identies the type used for the display
on the analyzer.
Figure 3-6.1.
Main Menu, Cong key.
CONFIG
Display
Communication
Sample Gas
Clock
Verify Schedule
Production
Codes
Moisture Unit
System Test
Figure 3-6.2.
Display sub-menu.
Config
Display
Contrast
Back Light
Font
Enter Value
1 to 9
On
Off
Enter Value
0 or 1
3-6 | 3050-RM Moisture Analyzer