Ametek 3050-RM

PN 305892901, Rev S
Conguring the 3050-RM
This section provides instructions for setting up your operating parameters us-
ing the Congurator Software.
Working From the General Tab
Use the General tab to view the current conguration and dene parameters
for the analyzer and for PC communications (Figure 3-7).
After initial setup, any changes to the analyzer communications
parameters must be made using the Device Communications tab.
These changes must be made before you make any changes to the
computer serial port settings.
Figure 3-7.
General tab, Congurator
Software.
3-16 | 3050-RM Moisture Analyzer