35
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
BEWARE!
Engine damage!
Engine oil can penetrate into the combustion chamber if the
machine tips over The engine can be damaged, if it is started.
Stand the machine upright. Never restart the engine.►
Inform your service workshop.►
Operator's workplace
The operator's authorised workplace is the area at the rear of
the machine, behind the cockpit The control commands for
the machine's moving directions are only relevant from this
position.
Under manual control
Operate the machine solely within the range marked in grey
(see Fig. S10). This is the shut down yoke's working range. You
must ensure that both of your legs are always behind the shut
down yoke, as the shut down yoke's working range is limited.
Fig. S10: Working position with manual controls (top view)
Using the remote cable control
Operate the machine solely within the range marked in grey
(see Fig. S11). The shut down yoke's working range is limited.
You must ensure that both of your legs are always behind the
shut down yoke when you are standing right by the machine.
safety
To Next Page
Loading...
