EasyManua.ls Logo

Ammann Rammax 1515-M - Check the Water Level

Ammann Rammax 1515-M
111 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
93
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
Check the water level
Remove the ignition key.
Disconnect the baterry's minus pin.
WARNING!
Danger of chemical burns from the battery acid!
The battery is lled with very corrosive battery acid. This battery
acid can cause severe burns if it gets on your skin. Battery acid
can cause blindness if it gets in your eyes.
Therefore:
Always wear protective goggles and industrial safety gloves
when carrying out maintenance work on the battery.
Remove any piece of clothing that gets battery acid on it im-
mediately.
Wash the part of your skin that got acid on it immediately in
clean water and send for a doctor.
Open one of the sealing caps.
Check the water level. ► The water level must reach up
to the marking.
Fill up with distilled water up to the marking, if the ll level
is below the marking.
Maintaining the Machine

Table of Contents

Related product manuals