Ammann Rammax 1515-M - Emptying the Fuel Tank

83
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
Emptying the fuel tank
The fuel can be drained out of the fuel tank through the drai-
nage opening
1
. i.e. to clean the fuel tank. The drainage
opening is located on the left side of the machine at the bot-
tom of the fuel tank (see Fig. MW6).
Fig. MW6: Fuel drainage opening
2 1
3
Place an undamaged tank under the drainage opening.
The tank must be capable of holding at least 25 litres.
Hold a funnel and hose in place to catch the fuel. Hang
the end of the hose
2
in the tank.
Open the engine protector.
WARNING!
Fire danger!
Fuels are extremely ammable. Escaping fuel can ignite!
Therefore:
Do not smoke when working on the fuel system.
Keep naked ames and sparks away.
Do not weld on or in the proximity of the fuel system.
►
►
►
Undo the screw
3
and catch the draining fuel in the
funnel.
Take the cover off of the fuel tank so that the air can ow
into the fuel tank.
The fuel tank is now fully emptied.






Maintaining the Machine