49
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
Water temperature warning light
The machine is tted with an air-cooled diesel engine. Ther-
fore this warning light is not used with this model.
Tipping encoder warning light
This warning light illuminates when the tipping encoder trips.
The engine switches itself off in this case automatically. The
machine cannot be started as long as the inclination indicator
is triggered.
CAUTION!
Engine damage!
Engine oil can penetrate into the combustion chamber if the
machine tips over The engine can be damaged, if it is started.
Therefore:
Stand the machine upright. Never restart the engine.►
Inform your service workshop.►
Display
The display consists of a seven-digit display. It combines
three different functions in a single display unit. These func-
tions are:
Operating hour meter
The operating hour meter counts and saves the machine run-
ning time. The count starts when the ignition is switched on.
Function code display
The function code display active when the machine is opera-
ting. It shows you the code's control command.
Fault code display
A possible defect will be detected by the machine controller
and displayed.
The defect is displayed as a fault code. There is a table with
all of the fault codes and their meaning in the Appendix to this
manual.
0.0
Display example
f
Display operating function example
E
Fault display example
E
Special fault display example
display controls / cockpit
To Next Page
Loading...
