60
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
Fig SE20 Traverse backwardsFig. SE19 Traverse forward
The machine will turn on the spot if you move the lever dia-
gonally.
Fig. SE22 Turn to the leftFFig. SE21 Turn to the right
Fast traverse switch
This switch is used to switch fast traverse On and Off. The
machine moves twice as fast as normal mode when switched
to fast traverse. The fast traverse switch function only works
in conjunction with the control lever.
The lever has two switch position:
Fast traverse switched off (Fig. SE23)
Fast traverse switched on (Fig. SE24)
Fig. SE23 Fast traverse switched
off
Fig. SE24 Fast traverse switched
on
Fast traverse remains switched on until the fast traverse
switch is returned to the neutral position. Fast traverse is also
switched off if one of the safety devices trips. However, the
switch will remain locked in place. Move the switch into the
neutral position before restarting the machine. Fast traverse
is not activated automatically when the machine starts, only
when the fast traverse switch is locked in place.
•
•
controls
To Next Page
Loading...
