Ammann Rammax 1515-M - Troubleshooting; Troubleshooting Table

96
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
troubleshooting
Troubleshooting table
Fault: Possible cause: Remedy:
Engine runs but the machine
does not move
Insufcient hydraulic oil in the
tank.
• Check hydraulic oil level
• Check the hydraulic system
for leaks
Engine runs but the machine
only moves forward!
Safety bar in engaged posi-
tion
Pull safety bar out of engaged
position.
• Only engage safety bar
during transport, not in the
work mode
Machine has tipped over. Stand the machine up and
inform the service workshop
The display shows an error
code
In the appendix, you will nd a
chart showing the error codes
and their causes.