Ammann Rammax 1515-M - Safety During Maintenance

40
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
Safety during maintenance
Service work covers inspections, maintenance and repairs.
Only specialists who have been trained on the equipment
are allowed to undertake the work.
The service work must be carried out as stipulated in this
operating and maintenance manual.
The service work is only to be carried out after the drives
has been stopped. You are only permitted to deviate
from this if the work cannot be carried out without a drive
running.
The hydraulic lines, pressurised lines and pressure accu-
mulator must be depressurised before any work is carried
out on them.
The electrical connection between the combustion engine
and the battery or the starter must be disconnected to
prevent inadvertent restarting before working on non-fu-
sed parts of the compactor's electrical system.
The articulated section of the articulated roller must be
locked against moving and endangering the personnel
before any maintenance work is carried out.
The safety devices must be retted correctly after the
maintenance work has been completed.
•
•
•
•
•
•
•
safety