Ammann Rammax 1515-M - Infrared Controller; Controls on the Remote Infrared Controller; Control Lever

59
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
Infrared controller
Use the remote infrared controller to control the machine from
a safe distance. The maximum range is 20 m.
The power for the remote infrared controller comes from solar
cells. Batteries are not needed.
Dust and dirt on the solar cell surfaces cause poor light yield,
which results in low energy efciency. Dirty solar cells can
drain the batteries in the infrared remote control. Therefore,
clean the solar cells immediately.
Controls on the remote infrared controller
2
1 3
4
5
1
Left drums forward / backward
2
Vibration forward / backward / Off
3
Right drums forward / backward
4
Fast gear on/off
5
Engine Start / Stop
Control lever
This lever is used to control the drums advance direction. The
left control lever controls the left pair of drums and the right
control lever controls the right pair. The drums cannot be con-
trolled separately.
The machine will advance if you move both levers forwards.
The machine will move in reverse if you move both levers
backwards.
controls