58
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
the opposite rotational direction to change the vibration shaft's
rotational direction. The active vibration button will then be
switched off automatically.
The vibration shaft will be braked before it starts to accele-
rate in the opposite direction. This procedure takes a few mo-
ments.
NOTE
Change the rotational direction of the vibration shaft during the
compacting work on slopes and declines so that it is always
against the slope. This will increase the machine's climbing abi-
lity and the traction.
controls
To Next Page
Loading...
