Ammann Rammax 1515-M - Changing the Hydraulic Oil; Changing the Hydraulic Filter

86
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
Fig. MW8 Going up an incline
Pull the fuel hose off and insert a new fuel lter. Change
the fuel hose if it is leaking or has become porous.
Fit a new fuel lter in the reverse sequence.
Check that the fuel system does not leak.
Changing the hydraulic oil / changing the hydraulic lter
Maintenance work on the hydraulic system is limited to lters
and hydraulic tanks. All other aggregates do not require main-
tenance. However, you should inspect the hydraulic pipelines
for leaks at regular intervals. Do not spray hydraulic hoses
with paint. The hydraulic oil should be also be exchanged in
the case of larger repairs on the hydraulic pipelines.
Replace the suction lter
SF
every time you change the
hydraulic oil and after every 1,000 running hours.
Replace the return lter cartridge
RF
:
after 75 running hours,
regularly after every 500 running hours,
once a year at least,
and every time the hydraulic oil is changed.
You can drain the hydraulic oil from the hydraulic oil tank
whenever necessary. For this, the hydraulic oil tank is equip-
ped with a discharge port. It is located on the right side of the
machine, on the underside of the nished frame (Fig. MW9).



•
•
•
•
Maintaining the Machine
1