70
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
Pass over the subsoil until it is compacted.
Fig. MB3: Compacting an embankment
Compacting embankments using a cable controller:
Move the machine backward from below onto the base of
the embankment (Fig. MB4).
Switch the vibration function to backward (Fig. MB5).
Fig. MB4: Machine at the bottom of an embankment Fig. MB5: Vibration reverse
Move the machine backwards and up and down the em-
bankment until the subsoil is compacted.
Compacting embankments using a remote infrared con-
troller:
Move the machine backward from below onto the base of
the embankment (Fig. MB6).
Switch the vibration function to backward (Fig. MB7).
operating the Machine
To Next Page
Loading...
