80
Rammax 1515-M/-MC/-MI/-MCI
Index: a; Issued 08/2010
Fig. MW2: Diesel engine oil lter
4
Use a lint-free cloth to clean the thread.
Screw a new oil lter into place and hand-tighten only.
Screw the stopper
1
back into the oil drainage hose and
use the clip to secure it in place
2
. You must ensure that
hose is in the correct position. It must not touch any of the
components.
Use the retaining clip to secure the oil drainage hose
3
in place.
2
Rell with new engine oil.
Use the oil dip-stick to check the level whilst relling with
suitable engine oil until the required level is reached.
Dispose of the old engine oil and old oil lter in compli-
ance with the national environmental regulations.
Maintaining the Machine
To Next Page
Loading...
