7-18
P129390-106 Operator Manual Cycle and Control Value Programming
4. If an incorrect value is entered, press the backspace key to clear
the entry, then use the keypad to enter the correct value.
5. Press Exit to abandon changes and return to the Machine Setup
screen.
OR
Press OK to save utilities set up changes and return to Utility
Control screen.
6. Once the day of the week has been selected (and restart times
have been selected), press Shutdown Time button to set up the
automatic shutdown time.
7. Enter the correct shutdown time value using the keypad. The
shutdown time value must be entered as a valid time of the day
in 24-hour format (e.g., 4:00 pm = 16:00).
• For utilities to be on all day, enter "00:00" in both Restart
Time and Shutdown Time.
• For utilities to be off all day, enter "24:00" in Restart Time
and "00:00" in Shutdown Time.
To Next Page
Loading...
