Anritsu MT1810A - Page 157

7.4 Automatic Measurement Commands
7-39
7
Remote Commands
:SENSe:MEASure:ASEarch:MODE <mode>
Parameter <mode>=<CHARACTER PROGRAM DATA>
PTHReshold Phase & Threshold
THReshold Threshold
PHASe Phase
Function Sets the execution item of Auto Search.
Example To set the execution item of Auto Search to Phase & Threshold:
> :SENSe:MEASure:ASEarch:MODE PTHReshold
Compatibility Compatible with MU183040A/B.
:SENSe:MEASure:ASEarch:MODE?
Response <mode>=<CHARACTER RESPONSE DATA>
PTHR Phase & Threshold
THR Threshold
PHAS Phase
Function Queries the execution item of Auto Search.
Example > :SENSe:MEASure:ASEarch:MODE?
< PTHR
Compatibility Compatible with the MP1632C.
:SENSe:MEASure:ASEarch:STARt
Function Starts the Auto Search function.
Example > :SENSe:MEASure:ASEarch:STARt
Compatibility Compatible with the MP1632C.
:SENSe:MEASure:ASEarch:STOP
Function Stops the Auto Search function.
Example > :SENSe:MEASure:ASEarch:STOP
Compatibility Compatible with the MP1632C.
:SENSe:MEASure:ASEarch:STATe?
Response <boolean>=<NR1 NUMERIC RESPONSE DATA>
1 Started
0 Stopped
–1 Auto Search failure (when any slot has failed)
Function Queries the Auto Search function state.
Example > :SENSe:MEASure:ASEarch:STATe?
< 1
Compatibility Compatible with the MP1632C.