Anritsu MT1810A - Page 211

7.4 Automatic Measurement Commands
7-93
7
Remote Commands
:SENSe:MEASure:BATHtub:TIMes <numeric>
Parameter <numeric>=<DECIMAL NUMERIC PROGRAM DATA>
2 to 1000 2 to 1000 times, in 1-time steps
Function Sets the number of measurements during Bathtub measurement.
Example To set the number of measurements to 100 times:
> :SENSe:MEASure:BATHtub:TIMes 100
Compatibility Incompatible with existing models.
:SENSe:MEASure:BATHtub:TIMes?
Response <numeric>=<NR1 NUMERIC RESPONSE DATA>
Function Queries the number of measurements during Bathtub measurement.
Example > :SENSe:MEASure:BATHtub:TIMes?
< 100
Compatibility Incompatible with existing models.
:SENSe:MEASure:BATHtub:INTerval <numeric>
Parameter <numeric>=<DECIMAL NUMERIC PROGRAM DATA>
0 to 9999 0 to 9999 s/1 s Step
Function Sets the measurement interval time during Bathtub measurement.
Example To set the measurement interval time to 50 s.:
> :SENSe:MEASure:BATHtub:INTerval 50
Compatibility Incompatible with existing models.
:SENSe:MEASure:BATHtub:INTerval?
Response <numeric>=<NR1 NUMERIC RESPONSE DATA>
0 to 9999 0 to 9999 s
Function Queries the measurement interval time during Bathtub measurement.
Example > :SENSe:MEASure:BATHtub:INTerval?
< 50
Compatibility Incompatible with existing models.