Chapter 7 Remote Commands
7-104
:SENSe:MEASure:BATHtub:DTIME?
Response <type>=<CHARACTER RESPONSE DATA>
DTIM, STAR, ELAP
Function Queries the Bathtub measurement time display type.
Example > :SENSe:MEASure:BATHtub:DTIME?
< STAR
Compatibility Incompatible with existing models.
:SENSe:MEASure:BATHtub:TIME:DTIMe?
Response <year>=<NR1 NUMERIC RESPONSE DATA>
2000 to 2036 Year 2000 to 2036
<month> = <NR1 NUMERIC RESPONSE DATA>
1 to 12 January to December
<day> = <NR1 NUMERIC RESPONSE DATA>
1 to 31 1st to 31st
<hour> = <NR1 NUMERIC RESPONSE DATA>
0 to 23 0 to 23 hours
<minute> = <NR1 NUMERIC RESPONSE DATA>
0 to 59 0 to 59 minutes
<second> = <NR1 NUMERIC RESPONSE DATA>
0 to 59 0 to 59 seconds
Function Queries the current date and time during the Bathtub measurement.
Example > :SENSe:MEASure:BATHtub:TIME:DTIMe?
< 2012,12,31,23,59,59
Compatibility Incompatible with existing models.
To Next Page
Loading...
