Anritsu MX269018A - Setting Modulation Wave Signal

3.8 Digital Code Squelch Data Setting
3-83
3
Measurement
3.8.1 Setting modulation wave signal
This section describes the settings to output modulation wave signal and
to turn it On/Off in the main function menu.
Signal Output Restart
■
Summary
Restarts output of a modulated signal. Starts output of a modulated
signal when Signal Output Play Mode is set to Once. Restarts
output starting from the beginning of the waveform when Signal
Output Play Mode is set to Repeat.
Signal Modulation
■
Summary
Selects Modulation On/Off for signals output from SG Output.
■
Options
Off Outputs Continuous Waves (CW).
On Outputs modulation waves.
Signal Output
■
Summary
Selects Output On/Off from SG Output.
■
Options
Off No signal is output.
On Outputs signal.