Chapter 3 Measurement
3-22
3.2.3 Performing measurement
There are two measurement modes: single and continuous. Measurement
is performed once in the single measurement mode, and continuously in
the continuous measurement mode.
Single Measurement
Items are measured only for the measurement count (Storage Count)
before measurement is stopped.
<Procedure>
1. Press
.
Continuous Measurement
The selected measurement items are continuously measured for the
measurement count (Storage Count). Measurement will continue even if
parameters are changed or the window display is changed. If other
applications are selected, the measurement will stop.
<Procedure>
1. Press
.
To Next Page
Loading...
