Anritsu MX269018A - Setting Terminals for External Device Control

3.10 Setting Terminals for External Device Control
3-103
3
Measurement
Input1 - Detect Polarity
■
Summary
Selects the Input1 logic.
■
Options
Pos. Sets Input1 to positive logic.
Neg. Sets Input1 to negative logic.
Input2 - Detect Polarity
■
Summary
Selects the Input2 logic.
■
Options
Pos. Sets Input2 to positive logic.
Neg. Sets Input2 to negative logic.
Open Collector
■
Summary
Selects Short or Open for the Open Collector connector.
■
Options
Short Sets Open Collector connector to Short.
Open Sets Open Collector connector to Open.
PTT - PTT Polarity
■
Summary
Selects the PTT connector logic.
■
Options
Pos. Sets PTT connector to positive logic.
Neg. Sets PTT connector to negative logic.