Anritsu MX269018A - RF Performance Test Items; RF Performanc Ce Test Items S

4.2 RF Performance Test Items
4-5
4
Performance Test
19. Record the measurement result for Radian rms (residual

M).
20. Confirm that the recorded measurement result for residual

M
satisfies the specifications.
21. Set as follows for the equipment.
● Modulation: AM
22. Press
to measure.
23. Record the measurement result for Depth rms (residual AM).
24. Confirm that the recorded measurement result for residual AM
satisfies the specifications.
25. Set the frequency of the signal generator and the equipment to
400 MHz, and repeat Steps 13 through 24.
26. Set the frequency of the signal generator and the equipment to
2700 MHz, and repeat Steps 13 through 24.