Anritsu MX269018A - Setting Averaging; Setting Marker

Chapter 3 Measurement
3-44
3.4.6 Setting averaging
This section describes the settings for the measurement results averaging.
Pressing
(Average) on Page 2 of the main function menu displays the
Average function menu.
Average
■
Summary
Sets the storage mode.
■
Options
Off Updates the data for every measurement.
Average Displays the average value for every
measurement.
Count
■
Summary
Sets the measurement count.
■
Setting range
2 to 9999
3.4.7 Setting marker
This section describes the settings for the marker-related. Pressing
(Marker) on Page 2 of the main function menu or
displays the
Marker function menu.
Normal
■
Summary
Enables the marker. The marker is displayed on the graph result in
the AF Measurement Result window. The time, frequency, and level
value of the marker position are displayed.
Delta
■
Summary
Enables the delta marker. Marker1 and Marker2 are displayed in
the graph of the measurement results in the AF Measurement
Result window.
Off
■
Summary
Disables the marker. The marker is not displayed on the graph
result in the AF Measurement Result window.