Anritsu MX269018A - Application Startup and Selection; Launching Application; Selecting Application

2.3 Application Startup and Selection
2-15
2
Preparation
2.3 Application Startup and Selection
To use this application, it is necessary to load (start up) and select the
application.
2.3.1 Launching application
The application startup procedure is described below.
Note:
The XXX indicates the application name currently in use.
■ Procedure
1. Press
to display the Configuration screen.
2. Press
(Application Switch Settings) to display the Application
Switch Registration screen.
3. Press
(Load Application Select), and move the cursor to “XXX”
in the Unloaded Applications list.

If “XXX” is displayed in the Loaded Applications list, this means
that the application is already loaded.

If “XXX” appears in neither the Loaded Applications nor
Unloaded Applications list, this means that the application has
not been installed.
4. Press
(Set) to load the application. If “XXX” is displayed in the
Loaded Applications list, this means that the application is already
loaded.
2.3.2 Selecting application
The selection procedure is described below.
■ Procedure
1. Press
to display the Application Switch menu.
2. Press the menu function key displaying “XXX”.

The application can also be selected with mouse, by clicking
“XXX” on the task bar.