Anritsu MX269018A - Setting Measurement Mode

3.3 Setting Measurement Mode
3-23
3
Measurement
3.3 Setting Measurement Mode
This section describes switching of measurement mode. Pressing
(Mode) in the main function menu switches the measurement mode.
Mode
■
Summary
Sets the measurement mode. Switch to the TX measurement mode
for transmission measurement. Switch to the RX measurement
mode for reception measurement. The RX measurement mode is
available when the signal generator option is installed.
■
Options
TX Switches the measurement mode to the TX measurement
mode.
RX Switches the measurement mode to the RX measurement
mode.