Anritsu MX269018A - Setting Measurement Items

3.4 TX Measurement Mode
3-29
3
Measurement
Output Offset
■
Summary
Turns on/off the Offset function.
■
Options
On Enables the offset function.
Off Disables the offset function.
Output Offset Value
■
Summary
This sets the level correction coefficient.
■
Setting range
–100.00 to 100.00 dB
3.4.3 Setting measurement items
This section describes the settings for the measurement items. Pressing
(Measure) and then pressing (Modulation Analysis) in the main
function menu displays the Modulation Setting function menu.
Modulation
■
Summary
Selects the modulation mode for the input signal.
■
Options
FM Select this when measuring FM modulation
signal.
Wide FM Select this when measuring Wide Band FM
modulation signal.
AM Select this when measuring AM modulation
signal.

M Select this when measuring

M modulation
signal.