Anritsu MX269018A - Audio Performance Test

4.3 Audio Performance Test
4-13
4
Performance Test
11. Set the frequency of No.2 or of bigger number in Table 4.3.4-2 to
Tone1 Frequency and repeat Steps 4 through 10.
12. Set the MS2830A as below.
Waveform: Tones
Tone1 Freq: 400 Hz
Tone1 Level: 3500 mV rms
Output Type: Bal.
Output Impedance: 100

13. Set AF Input of the MS2830A as below.
● Input Type: Bal.
● Input Range: 5 V p
14. Repeat Steps 8 through 11.
15. Set Output Tone1 to Off to turn Off the signal output.