1.1 Product Overview
The MS2830A and MS2840A Signal Analyzer enables high-speed,
high-accuracy, and simple measurements of transmission characteristics
of base stations and mobile stations for various types of mobile
communications. The MS2830A and MS2840A has high-performance
signal analyzer and spectrum analyzer functions as standard, with
optional measurement software allowing modulation analysis
functionality supporting various digital modulation modes.
The MX269018A Analog Measurement Software (hereinafter,
"MX269018A") is a software option used to measure the transmission and
reception characteristics of radios which use analog modulation.
The MX269018A is available for the MS2840A, or MS2830A that Low
Phase Noise Performance option (MS2830A-062/066) is installed.
The MX269018A provides the following functions.
•
Transmitter power measurement
•
Carrier frequency
•
Modulation accuracy measurement
•
Distortion factor measurement
•
Output signal for RX measurement
•
Audio signal output for TX measurement (Audio Generator)
•
Audio signal measurement (Audio Analyzer)
To use the function of signal output for RX measurement of MX269018A,
either one of the following hardware options of MS2830A or MS2840A is
required.
•
MS2830A-088/188, MS2840A-088/188 3.6GHz Analog Signal
Generator
•
MS2830A-029/129, MS2840A-029/129 Analog Function Extension for
Vector Signal Generator
To use Audio Generator/Audio Analyzer of the MX269018A, the MS2830A
hardware option below is required.
•
MS2830A-018/118 Audio Analyzer
To Next Page
Loading...
